Brewery Lane, Gateshead, Tyne and Wear

North East Paving And Gardens is community supported. We may earn a small commission through links on this page - Read More

How To Level A Sloping Garden

If you’ve got an uneven garden causing you a headache, you should learn how to level a sloping garden. If you are not keen on doing it yourself, find out how much to level a garden with our comprehensive guide. For now, though, the best way to level a sloping garden is to get a team of installers and use shovels and rakes. This allows you to remove soil from the higher parts of the slope. We recommend this method for smaller slopes, and if you are looking at a larger area, consider retaining walls, terracing and water drainage systems. 

The Best Way To Level A Garden Without A Digger

Step 1- Mark out the garden

Before you undertake any major project, you should always have a plan. This is the key to a well-organized project and high-quality garden. You first need to mark out the garden, which can be achieved using a marker, string and pegs. It gives you an accurate idea of the dimensions of the garden that you’re working with. 

You need to measure the distance of the desired boundaries. From there, you can lay down the string and use pegs to secure it along your marked-out area. Once you finish doing this, ensure that your measurements are accurate so that when you complete your garden, it’s all level. 

Step 2 – Lay down a base

Nobody ever wants flooding or pooling; this is where a gravel base comes in handy; by doing this, you allow drainage. All you have to do is spread a thin layer across the area you’ve marked out, ensuring no gaps or holes in the gravel. To lay it evenly, we recommend using the rake to get good coverage. 

Step 3 – Tip soil into the garden

Once you have laid down a gravel basel, it’s time to tip soil into the garden. Start by adding soil to the area you want to level until it achieves your desired depth – this will help ensure that you get an even result when finished. After tipping the soil in, use a rake or hoe to spread it out and make sure that it is evenly distributed before continuing with any other levelling work.

Step 4 – Level off the ground

This is where the magic starts to come together. You need to lay down the soil in the garden parts you want to level until it reaches the required depth. Once the materials are all down, you need to level it all out so that it’s even; we suggest getting a shovel and removing any lumps and bumps that may be left behind and causing inconsistency in the surface. You can also use a leveling board to ensure that the slopes are even and consistent. If they’re not, you’ll need to adjust slightly before finishing.

Step 5 – Compact the soil

You need to hire a compactor and go over the soil. You can find out what the top rated equipment for levelling ground is and this will ensure that it is smooth and level and that you get a consistent texture throughout. You may need to go over it multiple times if there are more challenging areas, but make sure you go over it nice and slow. 

Step 6 – Fill in trenches or deeper holes

If you see any deeper holes or trenches that need to be filled in, you need to fill them with soil until it’s all even. Use a rake to spread it out evenly to match the rest of the garden, and then complete steps four and five again until you can see a flat surface throughout the garden.

Step 7 – Rake the entire surface

One final check is needed before signing off on the project; you need to rake all the additional soil across the garden to ensure that no areas have been left and that there’s an even spread. You can also find out whether spreading soil on top of grass to level it works, and you should be able to stand back and look at your garden and see it covered nicely and evenly without any glaring holes or gaps.